CAT 8 STP PATCH

Supra Cat 8 Network Patch Cable - Astonishing speed and accuracy!

Supra Cat 8 is once more one step ahead by providing a future proof cable, e.g. 40GBASE-T over one singel cable! It is used beneficially in TCP/IP and UDP applications where bit-correct, jitter-free data transmissions is critical, e.g. 4K and 8K video streaming, high quality music streaming (e.g. 32 bits @ < 700 kHz for some downloadable music and in-studio applications), gaming and data centers, and in-building installations such as hotels, conference facilities, among others.

Further it is available pre-connected as patch cables in a number of standard lengths, refer to available variant meny, pre-connected with Supra RJ45 Connectors, a fully shielded connector supporting the astonishing performance of the cable also under tough service conditions and it is possible to connect on-site.

HDBaseT is transmitted over 6A up to 100 m (328 ft) long, with 8P8C modular connectors of the type commonly used for ethernet local area network connections. From Cat 6A to Cat 8 the step is four times the bandwidth. Supra Cat 8 allows for 2,000 MHz(!) an incredible transfer speed providing for quality enhancing massive headroom. 

HDBaseT transmits uncompressed ultra-high-definition video (up to 4K), audio, power over HDBaseT (PoHDBaseT - up to 100W), Ethernet, USB, and a series of controls such as RS and IR.

 

Features and benefits

  • Performance better than "8.2" according to preliminary specification IEC 61156-10 - Astonishing future proof transfer speeds
  • Excellent NEXT (= crosstalk), very low dampening and mutual lead pair interference - Bit correct transfers
  • Low dampening - long cable lengths without signal degradation or voltage drops for PoE
  • Excellent shielding, both pair and total - Almost completely interference immune with very low pick-up
  • Low jitter, perfect timing - Very low bit stream timing errors gives low needs for error corrections, thus high transfer speeds
  • Supra Connectors - Allows for maintained transmission performance also under tough service conditions
  • Bandwidth at 2,000 MHz - Buckle up because this is going to be a ride to remember ...
  • Flame retardant, halogen-free - Allowed in public spaces and buildings
  • Made in Sweden!

 

Usage

Installation and patch cable for all networks conforming to ISO/IEC 11801 and EN 50173 (2nd issue), for computer centrals according to ISO/IEC 24764, EN 50173-5 and also TR 11801-99-1. Ideal for all applications from D up to FA and Class II, Multimedia (TV, video, data, voice) >40 GbE enligt IEEE 802.3 bq (draft), cabel sharing, VoIP and PoE/PoE+.


Technical Info

Mechanical Specifications

Standard Cat 8 Patch Ethernet Cord  
Connectors Supra RJ45 Male ► Supra RJ45 Male  
Signal direction Bi-directional  
Application examples  Ethernet 40GBASE-T  

 

Cable design

Cable 4 pair, Cat 8 S/STP PIMF  
Lead area 0.23 / 26 mm/ AWG
Number of strands 7 pieces
Lead material Bright drawn oxygen-free 5N copper  
Insulation Air-injected, low capacitance PE  
Inner shield Aluminium foil  
Outer shield Tin plated, oxygen-free 5N copper braid  
Jacket PE (FRHF)  
Outer dimension Ø 6 mm
Flame retardancy Yes  


Electrical performance

Resistance 145 Ohm / km
Capacitance 43 pF / m
Bandwidth 2,000  MHz
Skew @ 100 MHz 5 / 100 ns / m
Impedance 100 Ohm
Velocity factor 0.8x C (speed of light)